How to use our anti-bark collar correctly: Complete guide

In this guide, I'll show you step by step how to use our anti-bark collar correctly, so you can start training your dog without wasting any time.

Steps to Use the Anti-Bark Collar

Here's how to use our anti-bark collar correctly:

1. Start by plugging in the collar until the battery is full (the indicator lights will stop flashing). 👇

2. Turn on the collar by pressing the power button until you hear a beep and the indicator lights turn on. Ps: These will automatically turn off after a few seconds, this is completely normal and the collar remains on. 👇

3. Press the settings button to choose the mode you want to use. 3 modes are available: sound (in green), vibration (in red), and sound and vibration (green and red). Use the vibration mode during your training sessions. 👇

4. Adjust the microphone sensitivity level by pressing the power button once for each level to find the one that is most suitable for your dog.

The collar should be triggered every time you bark. I recommend setting the collar to "sound" only to find the right sensitivity before starting training. Vibration should always be used with positive reinforcement.

The higher the level, the more sensitive the microphone will be to noise and the collar will be triggered easily. The lower the level, the louder the noise will be required for the collar to trigger. 👇

5. Once the settings are set, attach the collar around your dog's neck and adjust it so that a single finger can fit between your dog's neck and the collar strap. The box should be at your dog's throat or to the side, not behind his head. 👇

6. When you are finished using the collar, press and hold the power button until you hear 2 beeps, which means the collar has turned off. 👇

As simple as that! Now you know how to properly use your anti-bark collar, you can move on to training your dog.

Good luck!🐾🐶